Musiclink AV

  • Increase font size
  • Default font size
  • Decrease font size
Home Cables Burn-In Service Musiclink Cable Burn-In service for all cables
PDFPrintE-mail


Musiclink Cable Burn-In service for all cables
View Full-Size Image


Musiclink Cable Burn-In service for all cables

Price per Unit (day): Call for Pricing
Number days in packaging:1
Number days in box:1
Ask a question about this product

A cable burn-in service using Cable Cooker Pro from the USA, for audiophiles who want to achieve maximum performance from their cables. See list below for pricing

It is a well-known fact that high-quality audio and video cables improve over time when used in a hi-fi or home cinema system. A hard, closed-in sound with a distinct lack of bass are the qualities most noted when a cable is new; a cable that has been ‘burned-in’ will sound more open, extended and three-dimensional, with a more natural, less sterile performance overall.

Unfortunately, most high-quality specialist cables only get close to realising their full potential after months of use. Playing wide-bandwidth music gradually improves the performance of speaker and interconnect cables, yet technically they will never reach optimum performance with music signals alone.

The problem is quite simple. Real music has very little high-frequency energy, and thus will have a limited ability to improve a cable. Research shows that musical instruments may produce energy above 20kHz, but there is little sound energy above 40kHz. Also, most microphones do not pick up sound at much over 20kHz.

Furthermore, even the best burn-in CDs have a limited effect, owing to the limited frequency range of a CD player. A typical CD player has a sampling rate of 44.1kHz (Red Book standard). Digital theory (Nyquist) suggests a maximum frequency of 22.05kHz; the highest frequency is always half the sampling frequency. In reality, 20kHz is about the maximum because of the need to filter within the replay device.

A BIT OF HISTORY

Very soon after the invention of radio, cable manufacturers found that the material touching the conductor had an effect on the performance of the cable. At the time, there was much speculation as to why this should be the case as the reasons were unknown. However, the work of Nickola Tesla in the latter part of the 19th century provided the answer. Tesla was the first to discover and scientifically investigate the phenomenon of passing very high voltages and frequencies (around 2000Hz) through a human with no ill effects. He named this the ‘skin’ effect – i.e. the signal passed over the skin, not through the person.

Cable or wire reacts in a similar way; high frequencies pass along the surface and avoid the inner parts of the wire. Therefore, in a high-performance cable, both the purity of the conductor and the quality of the wrapping/dielectric are important for optimum performance. However, the manufacturing process creates tension, stress and static charges between the conductor and dielectric, and the resulting deleterious effects remain permanent unless properly dealt with.

Therefore, while it is accepted that sound, be it composed music or carefully generated frequencies played through an audio system, will improve a cable’s performance over time, it must also be accepted that the overall effect is limited technically. Cables conditioned in this way will never reach their true performance potential. Thus, an alternative method is required.

The challenge is two-fold: burn in time and burn in effectiveness. How can a cable be fully conditioned, and the time required to undertake this conditioning decreased from several months to just one day?

CABLE CONDITIONING

It is critical to not only concentrate on the conductor, but also the dielectric. Ideally, cable burn-in needs to force electrons into all areas of the cable; this is something that simply playing music through an audio system can never achieve.

The Cable Cooker not only dramatically reduces the burn-in time of all cables, but also fully prepares them like no music ever can. Cable Cooker does more than simply synthesise music; using specially-developed technology, the unit generates a sequence of unique ultra-low frequencies to penetrate the core of the conductor, and ultra-high frequencies that penetrate both the conductor and the dielectric.

Using conventional methods, it’s extremely difficult to condition the dielectric of a cable, yet this is exactly where effort should be focused. Using carefully controlled energy levels and frequencies, electrons are forced and attempt to enter the dielectric. Imagine a high-frequency, high-energy force zipping along the conductor surface in a corkscrew fashion between the conductor and into the dielectric; the malingering electrons and negative charges are then forced to join the procession.

Through this technique of ultra-low and ultra-high frequencies in a musical synthesis, the cable is fully prepared and burned in within 24 to 48 hours. This guarantees total penetration of the core of the cable, and also that the interface between the outer conductor surface and dielectric is fully and properly conditioned.

This technique fully prepares cables for audio or video use in a way that no amount of music ever can. To put this into context, Cable Cooker produces 10,000 times the upper frequency limit of a typical CD player, which not only dramatically reduces the burn-in time for new cables but also fully prepares and conditions your existing cables.

We offer burn-in service for all cables ranging from interconnects, speaker cables, digital, balance XLR cables & Power Cords using the famous cable cooker Pro from USA. If you are interested in the cable burn-in service, please send us an email or call us @ 65-62911106 for further details.

Our Service rates 4-6mm cable diameter @ SGD$20.00 / 3 days 7-8mm cable diameter @ SGD$30.00 / 3 days 9-10mm cable diameter @ SGD$40.00 / 3 days 11-12mm cable diameter @ SGD$50.00 / 3 days 12mm cable diameter onwards @ SGD$60.00 /3 days Remarks: additional days required @ SGD$10.00/day.

4-6mm diameter @ SGD$20.00 / 3 days 7-8mm diameter @ SGD$30.00 / 3 days 9-10mm diameter @ SGD$40.00 / 3 days 11-12mm diameter @ SGD$50.00 / 3 days 13-14mm diameter @ SGD$60.00 / 3 days 15-16mm diameter @ SGD$70.00 / 3 days 17-18mm diameter @ SGD$80.00 / 3 days 19-20mm diameter @ SGD$90.00 / 3 days 20mm onwards @ SGD$100.00 / 3 days. Remarks: Additional days required @ SGD$10.00/day

10-12mm diameter @ SGD$30.00 / 5 days 13-14mm diameter @ SGD$40.00 / 5 days 15-16mm diameter @ SGD$50.00 / 5 days 17-18mm diameter @ SGD$60.00 / 5 days 19-20mm diameter @ SGD$70.00 / 5 days 20mm onwards @ SGD$80.00 / 5 days Remarks: Additional days required @ SGD$10.00/day


Availability

In Stock: 1

Usually ships in:

3-5d.gif




Last Updated: Monday, 24 September 2018 13:08